Tag Archives: hamvention

2011 Dayton Hamvention

Hey all, just got back in from the 2011 Dayton Hamvention. This year was an absolute blast and I would say attendance was much higher this year.

For our 2nd excursion to Dayton, we left on Wednesday morning to make the early Thursday morning start to Contest University (CTU) coordinated by K3LR. If you have never been, I highly recommend attending CTU. Much information is to be had as well as networking with fellow contesters but here and abroad. The material was fairly technical, although it applied directly to my operating methods and will hopefully help me work towards optimizing my time contesting. For the price ($50~$90) it was well worth the experience. More information including webinars are on their site http://www.contestuniversity.com/

Since Dave (NB3R) scored us Flea Market vendor spaces, we had to make the 7:30AM cutoff to get in the area to park. All three days consisted of 5AM wake-up calls, which I seemed to have no problem doing at Dayton.

More updates and photos to come later tonight.

73
–jeff
N3QO

HNY and much DX in 2011!

First off, HNY or Happy New Year for those not sporting digital modes on HF.

Any New Year’s resolutions? At first I didn’t think I had but I guess mine would be the following:

-Actually learn code (CW) besides, CQ DE N3QO, 5NN and TU. A future post…
-Not spend as much money on the hobby as I have in last 2 years, although a Flex 3000 is in works.
-Timonium Hamfest, Timonium, MD.
-Dayton Hamvention. Enough said.
-Sussex Hamfest, I missed this one in 2010 because of work on-call.
-The 2011 antenna projects. See next post.
-..and finally, operate more, build less.

Writing the last post (year in review), I realized I did more station building than actual operation. I’m hoping we have better sunspot performance this year, but now I’m poised to hunker down and start working some DX.

2010 year in review

As I’m thinking about what to write about 2011, I’m realizing that 2010 was a pretty kick ass year in the hobby for me and I’m starting to realize I’ve done too much. Here’s a summary.

In February I was introduced to 160m and found a great group located in the PA/NJ/DE/MD area who are on 1900khz every night at 8pm. I would finally get to meet them face to face at the Timonium Hamfest in Maryland which would start an every other Saturday tradition of breakfast in Delaware with the guys.

The hexbeam I built back in the previous October (2009) survived the 2ft of snow we saw in March. I would find myself being invited to operate the ARRL DX contest at NE3F’s, which is always fun but also quite an endurance run. I also started operating HF mobile and ended up working VK7ZE on our way to our club station with 100w in a screwdriver antenna on 20m. He was working the states long-path, some 14k miles.

Early in April, I decided to try a 3 element Mosley TA-33 tribander and ended up selling my Hexbeam to Dave (K3GMT). Also in April, I went QRO with a Dentron Clipperton which would be a requirement for 160m in the summer. 1200watts with a set of 4 572B’s. The transformer makes a menacing growl when it’s cranked on 40m, truely a welcomed addition to the shack.

Early in May, Jon (N3INJ) called to tell me 6m was open, of which I didn’t have an antenna for. Within about 45 minutes, I had a 6m delta loop up in the air and started making first 6m contacts. Later that month Laurie and I made it to Dayton. This was our first and plan to make it a yearly event.

I started off the month of June by rotating the polarity of my 2m cubical quad to horizontal and start working 2m sideband. So far it’s been slow, but my furthest stations I’ve worked was Pittsburgh and Connecticut, but the ARRL VHF contest was a blast!

The 1900 guys and I would end up doing a Field Day Expedition to Assateague Island in Maryland. It took a fair bit of planning, governmental politics and a little bit of cash, but we pulled it off. We also pulled off toasting an Alpha amplifier and an Icom 7000. But we all made it out alive with a new experience under our belts and I experienced a pileup the night before on PSK from the beach.

Early in July, I installed the trapped 40/80/160 antenna and start getting S9+40-50 signal reports on 160m, something no G5RV would do. Later that month I would end up in,out and then back in the hospital for a perforated appendix, which made for good rest time for DX at home, but no HT’s in the hospital. I also missed out on IoTA weekend, bummer.

In August I started playing around with satellites and sold the Icom 746 and purchased a Yaesu 847. Just as quickly as I got into this mode, I was out of it, but I walked away with a QSO with Commander Doug Wheelock aboard the ISS while we were mobile.

September my HF configuration came full circle. I ended swapping out the Mosley for my previously rebuilt hexbeam. Luckily for me, K3GMT’s plans for it didn’t work out, and I have my creation back on the roof and working DX like a mad man. At the same time we relocated the 2 meter antennas to a newly installed guyed mast just behind the garage.

October 1st I would wake to find my shack in the basement flooded due to a large rainfall. A normally quiet sump pump would awaken in the night, but a tripped GFI breaker caused it to stop and leave me with a foot of water. No ham equipment was harmed, but the shack ended up being relocated to the dining room. Luckily for me I have a loving, understanding and licensed (general) YL. Speaking of which She and I worked the PA QSO party, but she has not yet given up my Icom 706. I don’t have the heart to take it back, and not that I need it, but it gives me an excuse to buy another rig.

The last quarter of 2010 has been fairly quiet. I’ve been voted into the board for my radio club, working towards DXCC, working more CW and playing around with APRS.

Laurie and I are both looking forward to a prosperous 2011, with me hopefully working HF mobile once again. Hi Hi.