N3QO » rg8x http://n3qo.com Wed, 11 Apr 2012 14:38:17 +0000 en hourly 1 http://wordpress.org/?v=3.3.2 DLARC Hamfest http://n3qo.com/archives/664 http://n3qo.com/archives/664#comments Fri, 05 Feb 2010 03:44:39 +0000 jeff http://n3qo.com/?p=664 Continue reading →]]> Tonight was the 2010 DLARC mini hamfest which brought a great turn out to our monthly meeting. I’m pretty psyched to have come home with about 300 feet of RG8/U. Coax is a non-stop necessity in this shack… At least for the time being. All in an effort to convert from my RG8x to support an upcoming amplifier purchase. For those not in the know, RG8x is a smaller diameter 50 ohm coax cable that serves the HF world very well, but usually has a maximum power rating of 300-500 watts.
[simage=115,512,n,center,]

]]> http://n3qo.com/archives/664/feed 0 Shack recabling. http://n3qo.com/archives/326 http://n3qo.com/archives/326#comments Sun, 21 Jun 2009 16:00:21 +0000 jeff http://n3qo.com/?p=326 Continue reading →]]> Also to note, I decided to rewire the inside portion of the shack and upgrade from RG-8x to RG-8u and also a quad Alpha-Delta switch. You can still see the existing 8x runs out to the outdoor grounding system, of which also feeds 8x up to the antennas. Only 200 feet of cable to replace… at $1.45/foot. Yikes.

4894_110900502596_735962596_3295479_992659_n

The switch on the left selects either antenna (beam or vertical) or dummy load. The switch on the right selects the radio, either the Icom or the Heathkit.

]]> http://n3qo.com/archives/326/feed 0